Raspberry Pi 4 7inch Laptop by simomon on Thingiverse: https://www.thingiverse.com/thing:7354020

Summary:
OverviewRaspberry pi 4 version of https://www.thingiverse.com/thing:7324764A small portable computer that can be created using a Raspberry Pi4.It has a 7-inch LCD screen and a practically sized keyboard built in.Parts usedRaspberry pi 4LCD:Geeekpi  7 inch screen  https://www.amazon.com/dp/B0CHRD7CQ3/Keyboard (US Layout):MCSaite mini keyboard https://www.amazon.com/dp/B07DZZWD9W/You will need to disassemble the keyboard and cut off the plastic around the edges.UPS:Treedix 5V Uninterruptible Power Supply https://treedix.com/ja/products/treedix5v-uninterruptible-power-supply-for-raspberry-pi-simultaneous-charge-output-provides-power-supply-via-pogo-pins-high-power-boost-circuit-compatible-with-raspberry-pi-zero-2b-3b-3b-4bBattery:18650 (x2)Misc:USB flat cable (UPS to LCD) &lt;e.g. https://www.amazon.com/dp/B095LSY9PF/&gt;HDMI flat cable &lt;e.g. https://www.amazon.com/dp/B0177ERQ08/&gt;USB Tyep-A to Type-C short cable (UPS to Rpi/LCD)M5x30 bolts&amp;nuts , F5-10M~F6-12M washers for hingeM2.5 Bolts &amp; insert nuts for backpanelM2.5 Bolts for screen_topDouble-sided tape for screen_frontpanel,keyboard_coverOptical fiber to guide the LED lightsUSB connector (to connect keyboard.) 3.5 mm audio jackSupplementary explanation:Because the Raspberry Pi's USB port faces outwards, the keyboard's USB connector needs to be rotated 180 degrees.(To be honest, it's not very smart. Any good ideas?)Using the shortest possible USB connector will minimize the protrusion.