Key Holder by mpgreenough1986 on Thingiverse: https://www.thingiverse.com/thing:4775253

Summary:
Hi all,Just a simple multilevel Hexagonal Key tidy.There are 3 heights of key fob to match the varying heights of the holder. Below are the quantities of each you would need to print to fill the holder but I think it looks better if you leave some gapsx4 - 15x11 - 20x4 - 25Depending on your printer you may need to scale the print to fit on your bed.Technically there should be a 0.1mm gap between the fob and the holder but I had a slight issue with the squish effecting the fit of the fobs into the holder so I scaled the fobs slightly more than the holder.I scaled to;Holder = 70%Fobs = 68.5%Just because I preferred the smaller fob size for the keyrings.Update: I have added a v2 holder to fit the 15mm key fobs. That way you can print all 15's.I have also added a v2 with holes as i know someone mentioned mounting it on a wall.Cheers